沧州思进国际贸易有限公司

产品介绍
返回顶部

Flanges are available as Weld Neck, Integral, Blinds, Targets and Test Blinds for use with the following pressure ratings:

Rating	150lb	300lb	400lb	600lb	900lb	1,500lb	2,500lb

Max. Working Pressure	285 PSI	740 PSI	990 PSI	1480 PSI	2220 PSI	3705 PSI	6170 PSI

Test Pressure	450 PSI	1125 PSI	1500 PSI	2225 PSI	3350 PSI	5575 PSI	9275 PSI

Operating Temperature Range	-28 To +540 Deg C	-28 To +540 Deg C	-28 To +540 Deg C	-28 To +540 Deg C	-28 To +540 Deg C	-28 To +540 Deg C	-28 To +540 Deg C

All material supplied by AT Engineering Solutions are complete with BS EN 10204.3.1.B certification as standard
with BS EN 10204.3.1.C certificates available upon request.
Materials are supplied in accordance with the following, as applicable to the product:
ANSI	American National Standards Institute
API	American Petroleum Institute
NACE MR-01-75	Sulphide Stress Cracking Resistant Metallic Materials for Oilfield Equipment
ASTM	American Society for Testing and Materials
ASME	American Society of Mechanical Engineers
Element	%	A106 GrB	A234 WPB	A333 Gr6	A420 WPL6	API 5L X52	WPHY 52	A182 F316L	A519 4130	A182 F51
Carbon (C)	Max	0.30	0.30	0.30	0.30	0.24	0.20	0.035	0.33	0.03
Carbon (C)	Min	-	-	-	-	-	-	-	0.28	-
Manganese (Mg)	Max	1.06	1.06	1.06	1.35	1.40	1.45	2.00	0.60	2.00
Manganese (Mg)	Min	0.29	0.29	0.29	0.60	-	1.00	-	0.400	-
Phosphorus (Ph)	Max	0.035	0.050	0.025	0.035	0.025	0.030	0.045	0.025	0.030
Phosphorus (Ph)	Min	-	-	-	-	-	-	-	-	-
Sulphur (S)	Max	0.035	0.058	0.025	0.040	0.015	0.010	0.030	0.025	0.020
Sulphur (S)	Min	-	-	-	-	-	-	-	-	-
Silicon (Si)	Max	-	-	-	0.30	-	0.40	1.00	0.35	1.00
Silicon (Si)	Min	0.10	0.10	0.10	0.15	-	0.15	-	0.15	-
Chromium (Cr)	Max	0.40	0.40	-	0.30	-	0.30	18.00	1.10	23.00
Chromium (Cr)	Min	-	-	-	-	-	-	16.00	0.80	21.00
Molybdenum (Mo)	Max	0.15	0.15	-	0.12	-	0.25	3.00	0.25	3.50
Molybdenum (Mo)	Min	-	-	-	-	-	-	2.00	0.15	2.50
Nickel (Ni)	Max	0.40	0.40	-	0.40	-	0.50	15.00	-	6.50
Nickel (Ni)	Min	-	-	-	-	-	-	10.00	-	4.50
Copper (Cu)	Max	0.40	0.40	-	0.40	-	0.35	-	-	-
Copper (Cu)	Min	-	-	-	-	-	-	-	-	-
Nitrogen (N)	Max	-	-	-	-	-	-	-	-	0.20
Nitrogen (N)	Min	-	-	-	-	-	-	-	-	0.08
Columbium (Cb)	Max	-	0.02	-	0.02	-	0.04	-	-	-
Columbium (Cb)	Min	-	-	-	-	-	-	-	-	-
Titanium (Ti)	Max	-	-	-	-	-	0.05	-	-	-
Titanium (Ti)	Min	-	-	-	-	-	-	-	-	-
Vanadium (V)	Max	0.08	0.08	-	0.05	-	0.10	-	-	-
Vanadium (V)	Min	-	-	-	-	-	-	-	-	-
Aluminium (Al)	Max	-	-	-	-	-	0.06	-	-	-
Aluminium (Al)	Min	-	-	-	-	-	-	-	-	-
Tensile Strength	Min PSI	60,000	60,000	60,000	60,000	66,000	66,000	70,000	105,000	90,000
Tensile Strength	Mpa	415	415	415	415	455	455	485	724	620
Yeild Strength	Min PSI	35,000	35,000	35,000	35,000	52,000	52,000	25,000	>80,000	65,000
Yeild Strength	Mpa	240	240	240	240	359	359	170	551	450
Hardness	Max HB	-	197	-	-	-	-	-	237	237
Impact Values Deg C	J	-	-	18J min av -45	17.6J min av -45	27J min av -50	27J min av -50	-	42J min av -50	27J min av -50